40 1/2"X 80 5/8" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout beaded one side square edge the other
Made from: Pine
Internal use
Finish: Stripped
is in a sold as seen condition
Beading needs tidying up,Has not be cut square at the bottom,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Watermark stain. Wipe over with a damp cloth normally makes these go,Well made with mortise and tenant joints,Some historic woodworm damage
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 205cm or 80 5/8"
**Height could be cut down by 8cm**
**1cm off the top 7cm off the bottom**
**Which could make the height as low as 197cm or 77 1/2 inches**

Width: 103cm or 40 1/2"
**Width could be cut by 4cm**
**Which could make it as narrow as 99cm or 38 7/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 30kg or 66lbs
Approximate age: Victorian
Victorian era 1837 to 1901