38 5/8"X 71 3/4" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
is in a rustic condition
Beading needs tidying up,Has not be cut square at the bottom,We have measured to make the door square,Needs some repair ,Some splits,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
5th picture shows patch of decay that needs filling
10th picture shows old yale lock hole
12th picture shows was a 6 panel door

If you have any other questions then please ask.

Measurements:
Height: 182.5cm or 71 3/4"
**Height could be cut down by 7.5cm**
**2.5cm off the top 5cm off the bottom**
**Which could make the height as low as 175cm or 68 7/8 inches**

Width: 98.3cm or 38 5/8"
**Width could be cut by 5cm**
**Which could make it as narrow as 93.3cm or 36 5/8 inches**

Door Thickness: 4.7cm or 1 3/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 22kg or 48lbs
Approximate age: Victorian
Victorian era 1837 to 1901