35 1/2"X 82" 1930s Internal Stripped Pine Four Panel Door 1over3 Reclamation

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pine & ply panels
Internal use
Finish: Stripped
is in good old condition
Has not be cut square at the bottom,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
6th picture shows broken bottom hinge

If you have any other questions then please ask.

Measurements:
Height: 208.5cm or 82"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 199.5cm or 78 1/2 inches**

Width: 90.2cm or 35 1/2"
**Width could be cut by 2cm**
**Which could make it as narrow as 88.2cm or 34 5/8 inches**

Door Thickness: 4.3cm or 1 5/8 inches
Top Panel Height: 63cm or 24 3/4"
Bottom Panel Heights: 98cm or 38 1/2"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 25kg or 55lbs
Approximate age: 1930s