34"X 72 1/2" Victorian Internal Stripped Pine Four Panel Door 2over2 Panelled

Panel Door with a four 2over2 panel layout panels are square edged
Made from: Pine
Internal use
Finish: Stripped one side & waxed the other.
is in overall good condition apart from
Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
Comes with brass hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 184.2cm or 72 1/2"
**Height could be cut down by 7cm**
**1cm off the top 6cm off the bottom**
**Which could make the height as low as 177.2cm or 69 3/4 inches**

Width: 86.6cm or 34"
**Width could be cut by 2cm**
**Which could make it as narrow as 84.6cm or 33 1/4 inches**

Door Thickness: 3.1cm or 1 1/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Victorian
Victorian era 1837 to 1901