34 1/2"X 80 1/2" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout ogee beading both sides
Made from: Pine
Internal use
Finish: Stripped
is in overall good condition apart from
Beading needs tidying up,Had a piece added to the side,Old holes have been filled,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows old yale lock hole
11th picture shows strip has been added to one side and colour matches well

If you have any other questions then please ask.

Measurements:
Height: 204.6cm or 80 1/2"
**Height could be cut down by 12cm**
**2cm off the top 10cm off the bottom**
**Which could make the height as low as 192.6cm or 75 3/4 inches**

Width: 87.7cm or 34 1/2"
**Width could be cut by 4cm**
**Which could make it as narrow as 83.7cm or 32 7/8 inches**

Door Thickness: 4.7cm or 1 3/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 30kg or 66lbs
Approximate age: Victorian
Victorian era 1837 to 1901