33 3/8"X 71 1/4" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout beaded one side square edge the other
Made from: Pine
Internal use
Finish: Stripped
is in overall good condition apart from
Beading needs tidying up,Has not be cut square at the bottom,Has not be cut square at the side,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 181cm or 71 1/4"
**Height could be cut down by 2.5cm**
**2.5cm off the top 0cm off the bottom**
**Which could make the height as low as 178.5cm or 70 1/4 inches**

Width: 85cm or 33 3/8"
**Width could be cut by 3cm**
**Which could make it as narrow as 82cm or 32 1/4 inches**

Door Thickness: 2.8cm or 1 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 20kg or 44lbs
Approximate age: Victorian
Victorian era 1837 to 1901