Panel Door with a four 2over2 panel layout ogee beading both sides
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in overall good condition apart from
Flaking paint ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints,See other notes
Had a repair by the bottom hinge
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows glued up split
5th picture shows needs filling

If you have any other questions then please ask.

Measurements:
Height: 205cm or 80 5/8"
**Height could be cut down by 10cm**
**2cm off the top 8cm off the bottom**
**Which could make the height as low as 195cm or 76 3/4 inches**

Width: 85.8cm or 33 3/4"
**Width could be cut by 4cm**
**Which could make it as narrow as 81.8cm or 32 1/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 25kg or 55lbs
Approximate age: Victorian
Victorian era 1837 to 1901