33 3/4"X 80 1/8" Victorian Internal Painted Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout ogee beading both sides
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in good old condition
Has not be cut square at the bottom,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 203.7cm or 80 1/8"
**Height could be cut down by 8cm**
**2cm off the top 6cm off the bottom**
**Which could make the height as low as 195.7cm or 77 inches**

Width: 85.8cm or 33 3/4"
**Width could be cut by 4cm**
**Which could make it as narrow as 81.8cm or 32 1/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 25kg or 55lbs
Approximate age: Victorian
Victorian era 1837 to 1901