32"X 79 1/4" 1930s Internal Painted Pitch Pine Four Panel Door 1over3 Panelled

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in overall good condition apart from
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some panels have splits,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
6th picture shows flaking paint

If you have any other questions then please ask.

Measurements:
Height: 201.5cm or 79 1/4"
**Height could be cut down by 13cm**
**3cm off the top 10cm off the bottom**
**Which could make the height as low as 188.5cm or 74 1/8 inches**

Width: 81.4cm or 32"
**Width could be cut by 5cm**
**Which could make it as narrow as 76.4cm or 30 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 17kg or 37lbs
Approximate age: 1930s