32 5/8"X 79 7/8" Victorian Internal Stripped Pine Six Panel Door 2over2over2

Panel Door with a six 2over2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
is in good old condition
Needs a good clean ,Some black spotting which will fade with sanding,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 203cm or 79 7/8"
**Height could be cut down by 10cm**
**2cm off the top 8cm off the bottom**
**Which could make the height as low as 193cm or 75 7/8 inches**

Width: 83cm or 32 5/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 79cm or 31 inches**

Door Thickness: 4.8cm or 1 7/8 inches
Height if the top 2 panels were cut off to make a smaller 4 panel door: 167cm or 65 3/4"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 22kg or 48lbs
Approximate age: Victorian
Victorian era 1837 to 1901