3 plank ledge door which has a pencil bead with 4 ledges fixed with handmade nails
Could also be used for a cupboard door.
Made from: Pine
Internal use
Finish: Stripped
In a rustic condition
Had a piece added to the bottom ,Has not be cut square at the bottom,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
5th picture shows small cut out on the bottom
11th picture shows tread old worm damage
12th picture shows elm bottom add on

Measurements:
Height: 177cm or 69 5/8"
**Height could be cut down by 29cm**
**10cm off the top 19cm off the bottom**
**Which could make the height as low as 148cm or 58 1/4 inches**

Width: 79cm or 31"
Plank Thickness: 1.9cm or 0 3/4 inches
Ledge/Brace Thickness: 2.3cm or 0 7/8 inches
Total Thickness of Planks & Ledges: 4.2cm or 1 5/8 inches
Height without the bottom plank: 148cm or 58 1/4"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.