31 7/8"X 78 3/4" 1930s Internal Painted Pitch Pine Four Panel Door 1over3 Old

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted Green
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in a sold as seen condition
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Old 1970s panel pin holes around the edge ,Some old lock holes ,Some old nail or screw holes
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
2nd picture shows top panel
4th picture shows old lock holes
6th picture shows old pin holes
11th picture shows flaking paint

If you have any other questions then please ask.

Measurements:
Height: 200.3cm or 78 3/4"
**Height could be cut down by 13cm**
**3cm off the top 10cm off the bottom**
**Which could make the height as low as 187.3cm or 73 5/8 inches**

Width: 81.1cm or 31 7/8"
**Width could be cut by 5cm**
**Which could make it as narrow as 76.1cm or 29 7/8 inches**

Door Thickness: 3.6cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 17kg or 37lbs
Approximate age: 1930s