31 7/8"X 69 3/8" Old Internal Painted Pine 4 Plank Ledge Door Reclamation

4 plank ledge door which has a pencil bead with 3 ledges
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in good painted condition
Flaking paint ,Needs a good clean ,Some old lock holes ,Some scratches and marks ,Well made
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
5th picture shows bottom edge in by 2cm
10th picture shows lovely old casement lock probably oak

If you have any other questions then please ask.

Measurements:
Height: 176.5cm or 69 3/8"
**Height could be cut down by 18cm**
**14cm off the top 4cm off the bottom**
**Which could make the height as low as 158.5cm or 62 3/8 inches**

Width: 81cm or 31 7/8"
Plank Thickness: 2cm or 0 3/4 inches
Ledge/Brace Thickness: 3.5cm or 1 3/8 inches
Total Thickness of Planks & Ledges: 5.5cm or 2 1/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 14kg or 30lbs
Approximate age: Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.