31 5/8"X 78 7/8" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
is in a sold as seen condition
Beading needs tidying up,Has not be cut square at the bottom,We have measured to make the door square,Needs some repair ,Old holes have been filled,Some black spotting which will fade with sanding,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 200.5cm or 78 7/8"
**Height could be cut down by 12cm**
**2cm off the top 10cm off the bottom**
**Which could make the height as low as 188.5cm or 74 1/8 inches**

Width: 80.5cm or 31 5/8"
**Width could be cut by 3cm**
**Which could make it as narrow as 77.5cm or 30 1/2 inches**

Door Thickness: 3.2cm or 1 1/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 22kg or 48lbs
Approximate age: Victorian
Victorian era 1837 to 1901