31 3/8"X 74 5/8" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout beaded one side square edge the other
Made from: Pine
Internal use
Finish: Stripped
is in a rustic condition
Beading needs tidying up,Has not be cut square at the bottom,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some panels have splits,Some scratches and marks ,Well made with mortise and tenant joints,Would benefit from a sanding
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows damaged beading
5th picture shows panel spilt

If you have any other questions then please ask.

Measurements:
Height: 189.8cm or 74 5/8"
**Height could be cut down by 6.5cm**
**0.5cm off the top 6cm off the bottom**
**Which could make the height as low as 183.3cm or 72 1/8 inches**

Width: 79.8cm or 31 3/8"
**Width could be cut by 2cm**
**Which could make it as narrow as 77.8cm or 30 5/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Victorian
Victorian era 1837 to 1901
No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.