Panel Door with a four 2over2 panel layout panels are square edged
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Used condition
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
Comes with cast iron hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
4th picture shows old lock holes
11th picture shows old hook screw holes


Measurements:
Height: 201.2cm or 79 1/8"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 192.2cm or 75 5/8 inches**

Width: 79.2cm or 31 1/8"
**Width could be cut by 3cm**
**Which could make it as narrow as 76.2cm or 30 inches**

Door Thickness: 3.1cm or 1 1/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 17kg or 37lbs
Approximate age: Victorian
Victorian era 1837 to 1901