30"X 77 1/8" 1930s Internal Varnished Pitch Pine Four Panel Door 1over3 Old

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Varnished
N/A
is in good old condition
Needs a good clean ,Some old lock holes ,Some old nail or screw holes
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 196.1cm or 77 1/8"
**Height could be cut down by 13cm**
**3cm off the top 10cm off the bottom**
**Which could make the height as low as 183.1cm or 72 inches**

Width: 76.2cm or 30"
**Width could be cut by 4cm**
**Which could make it as narrow as 72.2cm or 28 3/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 17kg or 37lbs
Approximate age: 1930s