30"X 67 7/8" Very Old Internal Stripped Pine 3 Plank Ledge Door Reclamation

3 plank ledge door which has a pencil bead with 4 ledges
Made from: Pine & elm ledges
Internal use
Finish: Stripped
is in a rustic condition
Has not be cut square at the top,We have measured to make the door square,Old holes have been filled,Old woodworm damage that has been treaded,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Unusual,Well made
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 172.5cm or 67 7/8"
**Height could be cut down by 18cm**
**10cm off the top 8cm off the bottom**
**Which could make the height as low as 154.5cm or 60 3/4 inches**

Width: 76.5cm or 30"
**Width could be cut by 4cm**
**Which could make it as narrow as 72.5cm or 28 1/2 inches**

Plank Thickness: 1.5cm or 0 1/2 inches
Ledge/Brace Thickness: 3cm or 1 1/8 inches
Total Thickness of Planks & Ledges: 4.5cm or 1 3/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 10kg or 22lbs
Approximate age: Very Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.