30 1/8"X 74 7/8" Old Internal Stripped Pine 9 Plank Ledge & Brace Door Old

9 plank ledge & brace door which has a V chamfer with 3 ledges & 2 braces
Made from: Pine
Internal use
Finish: Stripped
is in a sold as seen condition
Some old lock holes ,Some scratches and marks ,Would benefit from a sanding
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
11th picture shows some paint still there

If you have any other questions then please ask.

Measurements:
Height: 190.3cm or 74 7/8"
**Height could be cut down by 19cm**
**13cm off the top 6cm off the bottom**
**Which could make the height as low as 171.3cm or 67 3/8 inches**

Width: 76.6cm or 30 1/8"
**Width could be cut by 3cm**
**Which could make it as narrow as 73.6cm or 28 7/8 inches**

Plank Thickness: 2cm or 0 3/4 inches
Ledge/Brace Thickness: 2cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 4cm or 1 1/2 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.