29 7/8"X77" 1930s Internal Painted Pine Four Panel Door Arched 1over3

Panel Door with a four 1over3 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Used condition
Flaking paint ,Needs a good clean ,Old 1970s panel pin holes around the edge ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description, we have taken 12 pictures, please look through them in detail.


Measurements:
Height: 195.6cm or 77"
**Height could be cut down by 10.5cm**
**1.5cm off the top 9cm off the bottom**
**Which could make the height as low as 185.1cm or 72 3/4 inches**

Width: 76.1cm or 29 7/8"
**Width could be cut by 6cm**
**Which could make it as narrow as 70.1cm or 27 1/2 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 18kg or 39lbs
Approximate age: 1930s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.