29 7/8"X 77 1/4" 1930s Internal Painted Pitch Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in overall good condition apart from
Flaking paint ,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 196.5cm or 77 1/4"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 187.5cm or 73 3/4 inches**

Width: 76cm or 29 7/8"
**Width could be cut by 5cm**
**Which could make it as narrow as 71cm or 27 7/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: 1930s