29 7/8"X 77 1/2" 1930s Internal Painted Pine Four Panel Door 2over2 Panelled

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in a rustic condition
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs some repair ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows damage to the left rail

If you have any other questions then please ask.

Measurements:
Height: 197cm or 77 1/2"
**Height could be cut down by 11cm**
**2cm off the top 9cm off the bottom**
**Which could make the height as low as 186cm or 73 1/8 inches**

Width: 76.1cm or 29 7/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 72.1cm or 28 3/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: 1930s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.