29 7/8"X 76 3/4" 1930s Internal Pitch Pine Four Panel Door 1over3 Reclamation

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in good old condition
Flaking paint ,Has not be cut square at the bottom,Has not be cut square at the top,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
0 of these photos have the following comments,

If you have any other questions then please ask.

Measurements:
Height: 195cm or 76 3/4"
**Height could be cut down by 12.5cm**
**2.5cm off the top 10cm off the bottom**
**Which could make the height as low as 182.5cm or 71 3/4 inches**

Width: 76cm or 29 7/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 72cm or 28 1/4 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 17kg or 37lbs
Approximate age: 1930s