29 7/8"X 76 1/2" Internal Natural Pine Four Panel Door 2over2 New Old Stock

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Natural
is in a sold as seen condition
Needs a good clean ,Some scratches and marks ,Well made with mortise and tenant joints
Never had hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows door has never been fitted still got the over length ends to trim off
12th picture shows dent

If you have any other questions then please ask.

Measurements:
Height: 194.6cm or 76 1/2"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 185.6cm or 73 inches**

Width: 76cm or 29 7/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 72cm or 28 1/4 inches**

Door Thickness: 3.6cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs