29 5/8"X 77" 1950s 1960s Internal Painted Pine Four Panel Door horizontal Old

Panel Door with a four horizontal panel layout it is beaded on both sides of the door
Made from: Pine & ply panels
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in a rustic condition
Flaking paint ,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows paint peeling off
5th picture shows lock hole

If you have any other questions then please ask.

Measurements:
Height: 195.7cm or 77"
**Height could be cut down by 6cm**
**2cm off the top 4cm off the bottom**
**Which could make the height as low as 189.7cm or 74 5/8 inches**

Width: 75.5cm or 29 5/8"
**Width could be cut by 2cm**
**Which could make it as narrow as 73.5cm or 28 7/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: 1950s 1960s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.