29 5/8"X 77 1/8" Old Internal Stripped Pine Four Panel Door 2over2 Reclamation

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
is in a rustic condition
Has not be cut square at the bottom,We have measured to make the door square,Old holes have been filled,Some old lock holes ,Some scratches and marks ,Well made with mortise and tenant joints,See other notes
Had a piece spliced in to the side stile
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 196cm or 77 1/8"
**Height could be cut down by 9cm**
**3cm off the top 6cm off the bottom**
**Which could make the height as low as 187cm or 73 1/2 inches**

Width: 75.5cm or 29 5/8"
**Width could be cut by 3cm**
**Which could make it as narrow as 72.5cm or 28 1/2 inches**

Door Thickness: 3.4cm or 1 1/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Old