Panel Door with a five horizontal panel layout beaded one side square edge the other
Made from: Pitch Pine
Internal use
Finish: Stripped
Glazed with 5 panes of clear,ribbed glass.
Used condition
Had a piece added to the bottom ,Had a piece added to the side,Has not be cut square at the top,We have measured to make the door square,Needs a good clean ,Some black spotting which will fade with sanding,Some old lock holes ,Some scratches and marks ,See other notes
Top pane is cracked. Glass needs new putty or beading
Comes with cast iron hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
4th picture shows repair to a middle rail
5th picture shows cracked top pane
12th picture shows piece added to both sides and the bottom. measurements include these

Measurements:
Height: 195.9cm or 77 1/8"
**Height could be cut down by 15cm**
**2cm off the top 13cm off the bottom**
**Which could make the height as low as 180.9cm or 71 1/8 inches**

Width: 75.3cm or 29 5/8"
**Width could be cut by 7cm**
**Which could make it as narrow as 68.3cm or 26 7/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 25kg or 55lbs
Approximate age: 1930s

!This has glass and will require careful handling!