29 5/8"X 76 1/2" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout beaded one side square edge the other
Made from: Pine
Internal use
Finish: Stripped
is in good old condition
Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 194.5cm or 76 1/2"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 185.5cm or 73 inches**

Width: 75.3cm or 29 5/8"
**Width could be cut by 6cm**
**Which could make it as narrow as 69.3cm or 27 1/4 inches**

Door Thickness: 3.3cm or 1 1/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Victorian
Victorian era 1837 to 1901
No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.