29 5/8"X 76 1/2" Victorian Internal Stripped & Painted Pine Four Panel Door 2over2

Panel Door with a four 2over2 panel layout ogee beading both sides
Made from: Pine
Internal use
Finish: Stripped one side & painted the other.
is in a sold as seen condition
Flaking paint ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
6th picture shows sticker

If you have any other questions then please ask.

Measurements:
Height: 194.5cm or 76 1/2"
**Height could be cut down by 10cm**
**2cm off the top 8cm off the bottom**
**Which could make the height as low as 184.5cm or 72 5/8 inches**

Width: 75.5cm or 29 5/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 71.5cm or 28 1/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 17kg or 37lbs
Approximate age: Victorian
Victorian era 1837 to 1901