29 3/4"X76 1/2" 1930s Internal Stripped Pine Three Panel Door 1over2 Reclaimed

Panel Door with a three 1over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
Used condition
Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
No hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
6th picture shows chip out the bottom edge
10th picture shows old lock holes


Measurements:
Height: 194.6cm or 76 1/2"
**Height could be cut down by 12cm**
**3cm off the top 9cm off the bottom**
**Which could make the height as low as 182.6cm or 71 7/8 inches**

Width: 75.7cm or 29 3/4"
**Width could be cut by 4cm**
**Which could make it as narrow as 71.7cm or 28 1/8 inches**

Door Thickness: 4.2cm or 1 5/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 18kg or 39lbs
Approximate age: 1930s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.