29 3/4"X 77" 1930s Internal Painted Pitch Pine Four Panel Door 1over3 Panelled

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in good old condition
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
10th picture shows old lock holes
11th picture shows flaking paint

If you have any other questions then please ask.

Measurements:
Height: 195.8cm or 77"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 186.8cm or 73 1/2 inches**

Width: 75.7cm or 29 3/4"
**Width could be cut by 3cm**
**Which could make it as narrow as 72.7cm or 28 1/2 inches**

Door Thickness: 3.6cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: 1930s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.