29 3/4"X 77 1/4" 1930s Internal Glazed Painted Pitch Pine Four Panel Door 1over3

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Glazed with 1 pane of clear,pattern glass.
is in overall good condition apart from
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
3rd picture shows someone has started to strip it

If you have any other questions then please ask.

Measurements:
Height: 196.5cm or 77 1/4"
**Height could be cut down by 10cm**
**3cm off the top 7cm off the bottom**
**Which could make the height as low as 186.5cm or 73 3/8 inches**

Width: 75.6cm or 29 3/4"
**Width could be cut by 3cm**
**Which could make it as narrow as 72.6cm or 28 1/2 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 20kg or 44lbs
Approximate age: 1930s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.
!This has glass and will require careful handling!