29 1/4"X 76 1/2" Victorian Internal Stripped Pine Four Panel Door 2over2 Rustic

Panel Door with a four 2over2 panel layout some of the beading is missing (see photos)
Made from: Pine
Internal use
Finish: Stripped
is in a rustic condition
Beading needs tidying up,Has not be cut square at the side,Has not be cut square at the top,We have measured to make the door square,Needs some repair ,Some old lock holes ,Some old nail or screw holes ,Some panels have splits,Some scratches and marks ,Would benefit from a sanding
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
5th picture shows split in the panel and some beading missing
10th picture shows top need squaring off

If you have any other questions then please ask.

Measurements:
Height: 194.5cm or 76 1/2"
**Height could be cut down by 6cm**
**0cm off the top 6cm off the bottom**
**Which could make the height as low as 188.5cm or 74 1/8 inches**

Width: 74.5cm or 29 1/4"
**Width could be cut by 3cm**
**Which could make it as narrow as 71.5cm or 28 1/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: Victorian
Victorian era 1837 to 1901