28 1/8"X 77 7/8" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout beaded one side square edge the other
Made from: Pine
Internal use
Finish: Stripped
is in a rustic condition
Has not be cut square at the bottom,We have measured to make the door square,Some black spotting which will fade with sanding,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
3rd picture shows heavily cut off the bottom
4th picture shows black spotting

If you have any other questions then please ask.

Measurements:
Height: 198cm or 77 7/8"
**Height could be cut down by 2.5cm**
**2.5cm off the top 0cm off the bottom**
**Which could make the height as low as 195.5cm or 76 7/8 inches**

Width: 71.5cm or 28 1/8"
**Width could be cut by 5cm**
**Which could make it as narrow as 66.5cm or 26 1/8 inches**

Door Thickness: 4.3cm or 1 5/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Victorian
Victorian era 1837 to 1901