27 7/8"X 75 3/4" 1950s 1960s Internal Painted Pine Four Panel Door horizontal

Panel Door with a four horizontal panel layout it is beaded on both sides of the door
Made from: Pine & ply panels
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in overall good condition apart from
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
4th picture shows ideally needs stripping back
6th picture shows flaking paint
12th picture shows not cut square at the bottom

If you have any other questions then please ask.

Measurements:
Height: 192.5cm or 75 3/4"
**Height could be cut down by 4cm**
**1cm off the top 3cm off the bottom**
**Which could make the height as low as 188.5cm or 74 1/8 inches**

Width: 71cm or 27 7/8"
**Width could be cut by 2cm**
**Which could make it as narrow as 69cm or 27 1/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: 1950s 1960s