27 3/4"X 85 1/8" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
is in overall good condition apart from
Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made,Would benefit from a sanding
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
6th picture shows large beaded panels one side
12th picture shows large hinges need some wd40

If you have any other questions then please ask.

Measurements:
Height: 216.4cm or 85 1/8"
**Height could be cut down by 12cm**
**2cm off the top 10cm off the bottom**
**Which could make the height as low as 204.4cm or 80 3/8 inches**

Width: 70.5cm or 27 3/4"
**Width could be cut by 4cm**
**Which could make it as narrow as 66.5cm or 26 1/8 inches**

Door Thickness: 4.6cm or 1 3/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 30kg or 66lbs
Approximate age: Victorian
Victorian era 1837 to 1901