27 1/2"X 76 1/4" 1930s Internal Painted Pitch Pine Four Panel Door 1over3 Old

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Made from: Pitch Pine
Internal use
Finish: Painted Cream
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in good painted condition
Flaking paint ,Needs a good clean ,Some old lock holes ,Some old nail or screw holes
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
0 of these photos have the following comments,

If you have any other questions then please ask.

Measurements:
Height: 193.7cm or 76 1/4"
**Height could be cut down by 14cm**
**3cm off the top 11cm off the bottom**
**Which could make the height as low as 179.7cm or 70 3/4 inches**

Width: 70cm or 27 1/2"
**Width could be cut by 4cm**
**Which could make it as narrow as 66cm or 25 7/8 inches**

Door Thickness: 3.4cm or 1 1/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: 1930s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.