27 1/2"X 73 3/4" 1930s Internal Glazed Stripped Pine Three Panel Door 1over2

Panel Door with a three 1over2 panel layout thumb nail beading both sides
Made from: Pine
Internal use
Finish: Stripped
Glazed with 1 pane of clear,opaque glass.
is in overall good condition apart from
Has not be cut square at the top,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Would benefit from a sanding
There are remains of old hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
6th picture shows little knick out the top rail

If you have any other questions then please ask.

Measurements:
Height: 187.5cm or 73 3/4"
**Height could be cut down by 9cm**
**2cm off the top 7cm off the bottom**
**Which could make the height as low as 178.5cm or 70 1/4 inches**

Width: 70.1cm or 27 1/2"
**Width could be cut by 4cm**
**Which could make it as narrow as 66.1cm or 26 inches**

Door Thickness: 3.4cm or 1 1/4 inches
Glass Height: 37cm or 14 1/2"
Glass Width: 49.5cm or 19 3/8"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: 1930s

!This has glass and will require careful handling!