25 3/4"X 76 1/2" Victorian Internal Painted Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout ogee beading both sides
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in good painted condition
Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Well made with mortise and tenant joints
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
11th picture shows scratch in the paint

If you have any other questions then please ask.

Measurements:
Height: 194.5cm or 76 1/2"
**Height could be cut down by 7.5cm**
**1.5cm off the top 6cm off the bottom**
**Which could make the height as low as 187cm or 73 1/2 inches**

Width: 65.4cm or 25 3/4"
**Width could be cut by 2cm**
**Which could make it as narrow as 63.4cm or 24 7/8 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Victorian
Victorian era 1837 to 1901