23"X 73 3/8" 1950s 1960s Internal Painted Pine Four Panel Door horizontal Old

Panel Door with a four horizontal panel layout it is beaded on both sides of the door
Could also be used for a cupboard door.
Made from: Pine & ply panels
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
is in a sold as seen condition
Flaking paint ,Has not be cut square at the bottom,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.

If you have any other questions then please ask.

Measurements:
Height: 186.4cm or 73 3/8"
**Height could be cut down by 2cm**
**1cm off the top 1cm off the bottom**
**Which could make the height as low as 184.4cm or 72 1/2 inches**

Width: 58.7cm or 23"
**Width could be cut by 2cm**
**Which could make it as narrow as 56.7cm or 22 1/4 inches**

Door Thickness: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 13kg or 28lbs
Approximate age: 1950s 1960s