23 1/2"X 71 1/4" 1930s Internal Stripped Pitch Pine Four Panel Door 1over3 Old

Panel Door with a four 1over3 panel layout thumb nail beading both sides
Could also be used for a cupboard door.
Made from: Pitch Pine
Internal use
Finish: Stripped
is in good old condition
Needs a good clean ,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
6th picture shows bit of damage
11th picture shows some staining probably lighten with sanding

If you have any other questions then please ask.

Measurements:
Height: 181.2cm or 71 1/4"
**Height could be cut down by 14cm**
**4cm off the top 10cm off the bottom**
**Which could make the height as low as 167.2cm or 65 3/4 inches**

Width: 60cm or 23 1/2"
**Width could be cut by 5cm**
**Which could make it as narrow as 55cm or 21 5/8 inches**

Door Thickness: 2.8cm or 1 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 14kg or 30lbs
Approximate age: 1930s