31 7/8"X 79 1/2" Victorian Internal Stripped Pine Four Panel Door 2over2 Old

Panel Door with a four 2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
is in overall good condition apart from
Has not be cut square at the bottom,We have measured to make the door square,Some of the panels are bowed,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
Comes with cast iron hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail.
8th picture shows top two panels are bowed

If you have any other questions then please ask.

Measurements:
Height: 202cm or 79 1/2"
**Height could be cut down by 11cm**
**3cm off the top 8cm off the bottom**
**Which could make the height as low as 191cm or 75 1/8 inches**

Width: 81cm or 31 7/8"
**Width could be cut by 5cm**
**Which could make it as narrow as 76cm or 29 7/8 inches**

Door Thickness: 4.5cm or 1 3/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 30kg or 66lbs
Approximate age: Victorian
Victorian era 1837 to 1901